If you are pricing a wall on the Texas coast, the first question is usually whether it will meet the strict codes of high-wind areas. It is the right question, and it has a practical answer. We have gotten approval on jobs in Texas to meet their standards.
On the Texas coast, the project engineer decides whether a wall system meets the windstorm standard, so Texas windstorm wall panels come down to that review. Our job is to give the engineer what they need.
The short version
- The project engineer decides whether the wall meets the Texas windstorm standard, and we supply the documents they need.
- We have gotten approval on jobs in Texas to meet their standards, and we are glad to talk through yours.
- A textured steel wall panel that our customers love, a clean and appealing wall face, and most importantly, a team that answers the phone when you call.
What an engineer needs from a wall panel is documentation: how it was tested, what it was tested for, and how it attaches. A supplier who can hand over that testing file makes the review much easier.
How we get Texas windstorm wall panels approved
Force Five is our high-wind panel, and it meets the strict codes of high-wind areas. The Florida approval and the Miami-Dade Notice of Acceptance are the testing files we hand to your engineer. Your engineer makes the final call for your site, and because these approvals come from some of the strictest wind requirements in the country, they answer many of the questions an engineer will ask.
We know what comes up on a Texas review, so if you want us to walk through the documents with your engineer, give us a call and we’d be glad to help.
What we send
Tongue-and-groove design with no screws through the face
Every one of our Texas windstorm wall panels is tongue and groove with hidden fasteners. The face stays clean and unbroken.

A clean face protects the finish. On the Gulf, that also means no screw holes for salt air to work on and no rust streaks running down the wall.
A durable texture that saves money
Our customers love the textured steel wall panel we manufacture, and the stucco-style face makes a wall look finished from the road. That look also helps with requirements that have nothing to do with wind.
Some cities set a limit on plain metal. A textured panel reads as a masonry-style surface, so Texas windstorm wall panels can satisfy that limit while the wall stays steel.
It saves money too. The panel arrives with its finish on, so one crew hangs the wall and the job moves straight on to the next trade, with no stucco subcontractor to book.

Choose the stucco texture of the Signature Series in 20 standard colors, with custom matching for jobs that need an exact shade. The Classic Series is an embossed Kynar finish in 4 standard colors. For schools and civic buildings, the Design Series adds 4 unique woodgrain patterns.

Common applications for Texas windstorm wall panels
Self storage is a common fit for Texas windstorm wall panels on the coast. With so much wall and so little glass, the exterior is what customers see first, and it has to keep looking finished with little upkeep.
Warehouses, manufacturing facilities and equipment buildings are common applications for Texas windstorm wall panels as well. These are large walls that need a durable finish, and the same crew that erects the building typically installs our panels, so there is no separate subcontractor to bring in.
Marinas and other coastal buildings fit well too. Haulover Marine Center in North Miami is one example, where oceanfront storage buildings had to meet the Miami-Dade requirements. You can read the Haulover project story here.
Schools and government buildings are another steady application for Texas windstorm wall panels. Steel costs less than aluminum, so a textured panel, including the woodgrain Design Series, gets a design team the look they want at a lower cost.

What to expect when you call us
Send us your elevations or drawings and we will get on the phone to go through them with you. We will tell you what this project needs from the panel, which colors are stocked and which we would match for you, and we will have the testing file ready if your engineer asks for it. If something in your detail needs a second look, you hear about it early, so there are no surprises.
Every panel is cut for your building, so the drawing has to be settled before production starts. We give you a straight lead time up front, and more than nine in ten of our jobs ship on time.
What it’s like to work with us
We are a small team with a small set of products, and we know them well. When you call about Texas windstorm wall panels, you reach someone who has answered that question before.
We are down-to-earth people with a good product, and we want you to feel taken care of. At our size your job matters to us, and customer service is a big part of what we sell.
The panels matter, and so does taking great care of the people who buy them.
If our panel is not a good match for your building, we will say so, and plenty of our customers have stayed with us for years.
Quick answers on Texas windstorm wall panels
Who approves Texas windstorm wall panels?
On the Texas coast, the project engineer decides whether the wall meets the windstorm standard for the site. We supply the testing and product documents the engineer asks for.
Do you have a Texas-specific approval?
We have the Florida approval and Miami-Dade NOA documents above, plus jobs in Texas that have been approved to meet local standards. Call us and we will talk through what your engineer needs.
Do you ship to Texas?
Yes. Strukturoc ships from Eagan, Minnesota, to jobs across the country, and a good share of our work is in the South.
Pricing a wall for a Texas coastal job?
Send us the elevations and we will price Texas windstorm wall panels for your building and line up the documents your engineer will want.
Contact us or request a quote, or start with the Force Five line or the STK2500.